Kingston 16gb 6000mt/s ddr5 cl30 dimm kit of 2 fury beast rgb expo

 
93,99 €
alk. 8,00 €/kk VPD tilillä
VPD Laskulla korotonta ja kulutonta maksuaikaa 14.11. asti
  • Välivarastossa 2 kpl
Toimituskulut alk. 4,99 €
Kingston FURY KF560C30BBEAK2-16 is a kit of two 1G x 64-bit (8GB) DDR5-6000 CL30 SDRAM (Synchronous DRAM) 1Rx16, memory module, based on four 1G x 16-bit FBGA components per module. Each module kit supports AMD EXPO v1.1 and Intel Extreme Memory Profiles (Intel XMP) 3.0. Total kit capacity is 16GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 30-36-36 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
Kingston FURY KF560C30BBEAK2-16 is a kit of two 1G x 64-bit (8GB) DDR5-6000 CL30 SDRAM (Synchronous DRAM) 1Rx16, memory module, based on four 1G x 16-bit FBGA components per module. Each module kit supports AMD EXPO v1.1 and Intel Extreme Memory Profiles (Intel XMP) 3.0. Total kit capacity is 16GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 30-36-36 at 1.4V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
FACTORY TIMING PARAMETERS
  • Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
  • EXPO Profile #0: DDR5-6000 CL30-36-36 @1.4V
  • EXPO Profile #1: DDR5-5600 CL40-40-40 @1.25V
  • XMP Profile #1: DDR5-6000 CL30-36-36 @1.4V
  • XMP Profile #2: DDR5-5600 CL40-40-40 @1.25V


FEATURES
  • Power Supply: VDD = 1.1V Typical
  • VDDQ = 1.1V Typical
  • VPP = 1.8V Typical
  • VDDSPD = 1.8V to 2.0V
  • On-Die ECC
  • Height 1.66? (42.23mm), w/heatsink


Lisätiedot:
  • Pelituotteet Pelikomponentit
  • Pelituotteet Gaming components

Lisätietoja
Takuu360
Kategoriat
Alin hinta edellisten 30 päivän aikana: 92,99 €